Commercial cooling
Industrial cooling
Portable industrial cooling
Mobile cooling
Products - ECP160000 Plastic Evaporative Cooler |
|
  |
Producing a flow rate of up to 16,000m3/hr this evaporative cooler is manufactured by EcoCooling Limited in an ISO 9002 quality environment. Designed to meet all European electrical, water and other safety legislation.
CABINET: The cabinet components are injection moulded structural foam polypropylene. The cabinets are UV stabilised and corrosion free. COOLING PADS: Cooling pads are Munters CelDek honeycomb, saturation efficiencies in the range of 85-89 % Munters CelDek 680x850x100mm, four pads total area 2.3m2 FAN: Standard motor is a 4/8 pole with a 6/12 pole motor available. |
| WATER: Supply minimum 1 bar max 7 bar. Minimum supply 500 L/hr. Sump Capacity 30L ELECTRICAL SUPPLY: 240V 50Hz. 12A start 8A running DRAIN: Minimum capacity 2000l/hr to an appropriate effluent point in accordance with local water regulations. CIRCULATION PUMP: 50W, 30L/min, Centrifugal, Encapsulated, Shaded Pole Magnetically Coupled, Auto reset overload. DIMENSIONS: Height 950mm, Length 1170mm Width 1170mm, Volume 1.3m3 WEIGHT: Dry 55Kg Operating 92kg. The cooler is designed to be supported from a plain edged vertical duct. DUCT: Length 645mm x Width 645mm CONTROL: Can be controlled in groups: Facility to directly connect to timer, thermostat, internal humidistat, external humidistat and fire alarm contact. Refer to separate documentation for details. WARRANTY: Two years: parts only. |
|
Work Space Cooling are specialists in the cooling of industrial and commercial premises
ACHIEVE UP TO 35 KW of COOLING for 1KW OF ELECTRICITY USED
ACHIEVE UP TO 35 KW of COOLING for 1KW OF ELECTRICITY USED
Site created by: Wyehead Design ©2005